First go to LINK and download the needed items
I also have a copy that I downloaded HERE. I don’t mean to infringe on any copyrights. If there’s any issues let me know Sandisk
The versions on the below will change as it gets updated. The files that I have may not and probably are not the newest.

tar xzvf iomemory-vsl_3.2.16.1731-1.0.tar.gz
cd iomemory-vsl-
apt-get install gcc build-essential debhelper linux-headers-$(uname --r) rsync
dpkg-buildpackage -uc -us
cd ..
dpkg -i fio-firmware-fusion_3.2.16.20180821-1_all.deb
dpkg -i fio-util_3.2.16.1731-1.0_amd64.deb
dpkg -i iomemory-vsl-4.9.0-8-amd64_3.2.16.1731-1.0_amd64.deb
modprobe iomemory-vsl or you could also reboot with reboot
After all of this is done the drive will be stuck at 25watt which can make it slow. If your mobo supports 75watts (PCIe 3.0) you should be ok to enable high power mode. To do this you do the following. To get the serial you can use fio-status -a and it’ll be after SN:
nano /etc/modprobe.d/iomemory-vsl.conf
options iomemory-vsl external_power_override=comma,separated,serials
You have to reboot to reload the driver.
To check to see if it worked you can do fio-status -a and then see if the External Power Override is ON.