Remote Control Terminal Session Windows Server

I just learned that you can remote control terminal sessions. They call it shadowing. I’ve only done it on Windows Server 2012 r2, but was super easy. You just need to open server manager, go to remote desktop services, then collections, then QuickSessionsCollections. Then you’ll see the connections in the upper right hand corner. Once […]

Read More

Supermicro X9 Hangs on Windows 10 reboot

This data has been copied from HERE Please follow the steps below: 1) Turn off the system completely, and turn it back on, you should be able to get back into the OS. 2)Download the following driver and extract it: https://downloadcenter.intel.com/download/22655/Intel-Chipset-Device-Software-for-HECI or my link here, this may not be the newest intel_chipset_SPS_MEI_NULL_v1.2.3.2003 3) Open up Device […]

Read More

create CD iso from folder

Download IMGBURN Now all that’s left is to glue the iso back together. In ImgBurn this accomplished by: Mode -> Build In the ‘Source’ section, click the ‘Browse for a folder’ icon. Select c:\iso\ms-iso. In the ‘Destination’ section, click the ‘Browse for a file’ icon. Give your iso a name and put it where you’d […]

Read More

Enable RDP from CMD

open up CMD with admin privileges then type the following Enable RDP connections Set-ItemProperty ‘HKLM:\SYSTEM\CurrentControlSet\Control\Terminal Server\‘ -Name “fDenyTSConnections” -Value 0 Make Firewall rule Enable-NetFirewallRule -DisplayGroup “Remote Desktop”

Read More

UEFI CloneZilla

When cloning using clonezilla I notice sometimes if the PC was using UEFI it wouldn’t clone. After some googleing I was able to find a post that mentioned you had to manually copy over the bootloader. It is very simple to do. Once booted into CloneZilla you enter shell instead of the normal start. Once […]

Read More

Add Windows Server 2016 Core to Existing domain

First we need to configure static IP address This can be done by typing the below Enter Powershell powershell.exe Change computer name Rename-Computer -NewName “NewName” Reboot shutdown -s -t 0 log back in and go to power shell powershell.exe Find interface index Get-NetAdapter Set IP Address New-NetIPAddress –InterfaceIndex 2 –IPAddress 192.168.1.16 -PrefixLength 24 -DefaultGateway 192.168.1.1 […]

Read More